| ADR |
Assembly, Disassembly, and Recycling |
Vehicle cycle modeling group covering materials and processes related to vehicle assembly, disassembly, and end-of-life recycling. |
| AI |
Artificial Intelligence |
Used in Flow AI-Assisted Mapping, where an AI-assisted semantic mapping service searches the flows of the dataset for each flow of an external import. |
| API |
Application Programming Interface |
Appears in the names of the OpenAI API Key and the Flow Mapping Service API in the Flow Mapping Settings. See Flow AI-Assisted Mapping. |
| AR6 |
IPCC Sixth Assessment Report |
Appears in impact method names such as AR6/GWP-100, the example default impact method in Settings. |
| BSFC |
Brake-Specific Fuel Consumption |
Fuel consumption per unit of power output. Used in Transportation Modes to estimate the energy intensity of Barge and Tanker modes. |
| C2G |
Cradle-to-Grave |
System boundary that covers all life cycle stages, from raw material extraction to end of life. |
| CD |
Charge Depletion |
Operational mode of a plug-in hybrid electric vehicle that assumes electricity from a battery is the primary source of energy. See Operational Modes. |
| CS |
Charge Sustaining |
Operational mode of a plug-in hybrid electric vehicle that runs as a hybrid or on gasoline. See Operational Modes. |
| F/TSE |
Formula / Time Series Editor |
The editor where you set a parameter with a formula and with time series values. See Formula Editor. |
| FE |
Fuel Economy |
Distance traveled per unit of fuel volume. Used in Transportation Modes to calculate the energy intensity of Truck modes. |
| FLCAC |
Federal LCA Commons |
A U.S. federal repository of life cycle inventory data. You can import its data into a dataset. |
| GREET |
Greenhouse gases, Regulated Emissions, and Energy use in Technologies |
The life cycle analysis model that PyGREET implements. |
| GVWR |
Gross Vehicle Weight Rating |
The maximum operating weight of a vehicle, set by the manufacturer. Used to classify vehicles (for example, as Heavy-Duty). |
| GWP |
Global Warming Potential |
How much energy the emissions of a greenhouse gas absorb over a given period, relative to CO₂. |
| HDV |
Heavy-Duty Vehicle |
A vehicle class covering trucks, buses and other large vehicles (typically over 8,500 lbs GVWR). HDVs are modeled separately because their fuel consumption, payloads and emission profiles differ. |
| HEV |
Hybrid Electric Vehicle |
A vehicle that combines an internal combustion engine with an electric motor and battery. Only regenerative braking and the engine charge the battery. You cannot plug it in. |
| HFO |
Heavy Fuel Oil |
The reference fuel for the energy intensity of Tanker modes (for example, HFO 2.7S) in Transportation Modes. |
| HHV |
Higher Heating Value |
The heat released by combusting a fuel, including the heat recovered from condensing the water vapor produced. You can select it as the basis for energy calculations in Settings. |
| HP |
Horsepower |
A unit of installed engine power. Used in Transportation Modes to estimate the energy intensity of Barge and Tanker modes. |
| ICEV |
Internal Combustion Engine Vehicle |
A conventional vehicle powered only by an internal combustion engine, usually in a single operational mode. |
| IPCC |
Intergovernmental Panel on Climate Change |
Source of the default GWP impact methods shipped with GREET. See Complete Dissociation to CO₂. |
| LCA |
Life Cycle Analysis |
A method for evaluating the environmental impacts of a product or system across its full life cycle. |
| LCI |
Life Cycle Inventory |
The inputs and outputs of a product system. "U.S. LCI" is the external inventory used in the example of Flow AI-Assisted Mapping. |
| LCIA |
Life Cycle Impact Assessment |
The phase of LCA that turns inventory results into environmental impacts with characterization factors. |
| LHV |
Lower Heating Value |
The heat released by combusting a fuel, excluding the heat recovered from condensing the water vapor produced. You can select it as the basis for energy calculations in Settings. |
| MPG |
Miles Per Gallon |
A measure of fuel economy. In PyGREET, MPG-Gasoline and MPG-Diesel express fuel economy per energy-equivalent gallon of gasoline or diesel, so you can compare fuel types. |
| NAICS |
North American Industry Classification System |
Industry classification stored on a stationary process as the 4-Digit NAICS Code. See Stationary Process. |
| PHEV |
Plug-in Hybrid Electric Vehicle |
A vehicle with an internal combustion engine and a battery you can recharge from an external power source. It can run in electric-only mode for shorter trips and switch to the engine for longer range. |
| SI |
International System of Units |
The base units in which PyGREET calculates. It converts the values you see on screen to your selected display units. See How PyGREET Calculates. |
| SOx |
Sulfur Oxides |
Emissions that PyGREET can calculate from the sulfur content of a fuel. See Carbon and Sulfur Balances. |
| UI |
User Interface |
Appears in the UI Zoom setting, the zoom level of the interface. See Settings. |
| URL |
Uniform Resource Locator |
Appears in the OpenAI Base URL setting. See Flow AI-Assisted Mapping. |
| VMT |
Vehicle Miles Traveled |
The total distance a vehicle travels. Used as a functional unit to normalize energy use and emissions in transportation modeling. |
| WTP |
Well-to-Pump |
System boundary that covers the upstream supply chain, from resource extraction to delivery of fuel at the pump (or point of use). |
| WTW |
Well-to-Wheel |
System boundary that extends from resource extraction through vehicle operation. It combines the WTP and vehicle operation stages. |