Transportation Energy Intensity¶
The energy intensity \(I\) of a transportation mode is the fuel energy needed to move one unit of cargo mass over one unit of distance. Its dimension is \([\text{energy}]/([\text{mass}]\cdot[\text{length}])\), and PyGREET reports it in \(\mathrm{J/(kg\,m)}\).
For Barge, Tanker and Truck modes, PyGREET calculates the energy intensity from the engineering parameters of the mode and the payload of each cargo. It calculates it separately for the loaded forward trip ("to") and the empty return trip ("from", or backhaul), because the load factor or fuel economy differs by direction.
Barges and tankers¶
Barges and tankers share the same formulation. PyGREET builds the energy intensity in three steps.
1. Installed horsepower scales with the payload:
2. Specific energy consumption of the engine, converted to energy units via the reference fuel heating value:
3. Energy intensity per unit cargo and distance:
Combining the three steps gives the closed form:
| Symbol | Meaning | Dimension |
|---|---|---|
| \(I\) | Energy intensity | \([\text{energy}]/([\text{mass}]\cdot[\text{length}])\) |
| \(HP\) | Installed horsepower for the given payload | \([\text{power}]\) |
| \(HP_\text{typ}\) | Typical horsepower | \([\text{power}]\) |
| \(HP_f\) | Horsepower factor (per unit payload) | \([\text{power}]/[\text{mass}]\) |
| \(P\) | Payload mass of the cargo | \([\text{mass}]\) |
| \(EC\) | Specific energy consumption of the engine: fuel energy consumed per unit of engine work. The mass of fuel cancels, so it is dimensionless | dimensionless |
| \(BSFC_\text{adj}\) | Adjusted brake-specific fuel consumption | \([\text{mass}]/[\text{energy}]\) |
| \(FC_\text{typ}\) | Typical fuel consumption | \([\text{mass}]/[\text{energy}]\) |
| \(hv_f\) | Heating value of the reference fuel (mass basis) | \([\text{energy}]/[\text{mass}]\) |
| \(LF\) | Load factor (fraction of installed power used) | dimensionless |
| \(\nu\) | Average speed of the mode | \([\text{length}]/[\text{time}]\) |
The load factor differs by travel direction: \(LF_\text{to}\) for the loaded forward trip and \(LF_\text{from}\) for the return trip. They give \(I_\text{to}\) and \(I_\text{from}\), respectively. The reference fuel for barges and tankers always uses a mass-based heating value (the shipped dataset uses Residual Oil for barges and Bunker Fuel, Heavy Fuel Oil (HFO 2.7%S) for tankers).
Reference fuel
PyGREET characterizes barges and tankers against the reference fuel set on the mode type, not against the fuel the mode burns. The fuels the mode actually uses, and their upstream burdens, come from the mode's fuel groups. Here, \(hv_f\) only converts engine fuel consumption into energy.
Trucks¶
For trucks, the energy intensity depends on the vehicle fuel economy instead of horsepower. The reference fuel uses a volume-based heating value (Conventional Diesel in the shipped dataset):
| Symbol | Meaning | Dimension |
|---|---|---|
| \(I\) | Energy intensity | \([\text{energy}]/([\text{mass}]\cdot[\text{length}])\) |
| \(EC\) | Energy consumed per unit distance | \([\text{energy}]/[\text{length}]\) |
| \(hv_f\) | Heating value of the reference fuel (volume basis) | \([\text{energy}]/[\text{volume}]\) |
| \(FE\) | Fuel economy (fuel volume per unit distance) | \([\text{volume}]/[\text{length}]\) |
| \(P\) | Payload mass of the cargo | \([\text{mass}]\) |
As with barges and tankers, the truck fuel economy differs by direction: \(FE_\text{to}\) for the loaded forward trip and \(FE_\text{from}\) for the empty return. They give \(I_\text{to}\) and \(I_\text{from}\).
For the fuel a truck actually burns, PyGREET multiplies \(I\) by the ratio of that fuel's volume-based heating value to \(hv_f\).
Other modes¶
PyGREET does not calculate the energy intensity from engineering parameters for every mode:
- Rail: you enter the energy intensity directly as a pre-calculated parameter, and PyGREET uses it for any cargo.
- Pipeline: you enter the energy intensity per cargo. If a cargo has no specific value, PyGREET uses the default for solids or liquids. There is no backhaul.
These modes have no closed-form expression here. PyGREET uses the value you enter as it is.