Skip to content

Biogenic CO₂ from Combustion

When a biogenic fuel is combusted, PyGREET estimates the resulting biogenic CO₂ and places it directly in the emissions inventory. It does this after biogenic carbon propagation. First, PyGREET propagates the biogenic carbon in resources through the pathway, using carbon relations for stationary processes and mix shares for mixes. Then it converts the biogenic carbon that reaches each combusted input into CO₂.

This applies to fuels combusted by conversion technologies (for example, boilers in stationary processes) and by powertrains (vehicle powerplants in operational modes).

Biogenic CO₂ Value

For a combusted input, PyGREET calculates the biogenic CO₂ by stoichiometry from the biogenic carbon the fuel carries:

\[ m_{\mathrm{CO_2,bio}} = -\,\frac{m_\text{comb}\, \cdot\, w_\text{bioC}\, \cdot\, cr_f}{cr_{\mathrm{CO_2,bio}}} \]
Symbol Meaning Dimension
\(m_{\mathrm{CO_2,bio}}\) Biogenic CO₂ placed for the combusted input \([\text{mass}]\)
\(m_\text{comb}\) Combusted mass of the fuel \([\text{mass}]\)
\(w_\text{bioC}\) Biogenic carbon share carried by the fuel input \([\text{mass}]/[\text{mass}]\)
\(cr_f\) Carbon ratio of the fuel flow (mass of C per mass of fuel) \([\text{mass}]/[\text{mass}]\)
\(cr_{\mathrm{CO_2,bio}}\) Carbon ratio of the biogenic CO₂ flow (mass of C per mass of CO₂) \([\text{mass}]/[\text{mass}]\)

The negative sign makes the biogenic CO₂ a credit. The carbon released on combustion is traced back to the biomass feedstock that absorbed it, so PyGREET records it as a negative biogenic CO₂ contribution. PyGREET then expresses the mass in the biogenic CO₂ flow's preferred base and scales it by the process block's allocation factor before it enters the inventory.

Biogenic Carbon Share

The biogenic carbon share \(w_\text{bioC}\) depends on where the fuel comes from.

  • Primary resource or internal product: \(w_\text{bioC}\) is the fuel flow's own biogenic carbon content. It is non-zero only when the resource belongs to a biogenic (Biomass) group. A primary or internal input that is not biogenic contributes no biogenic CO₂.
  • Output of an upstream process: \(w_\text{bioC}\) is the propagated biogenic carbon content that arrives at the input, that is, the value biogenic carbon propagation delivers across the pathway.

Combusted Mass

The combusted mass is the amount of fuel actually burned, expressed in mass:

\[ m_\text{comb} = \begin{cases} \operatorname{to\_mass}\!\big(A \cdot \varphi_\text{pp}\big) & \text{powertrain (vehicle fuel)} \\[1.5ex] \displaystyle\sum_{c} \operatorname{to\_mass}\!\big(A_c \cdot \varphi_c\big) & \text{conversion technologies} \end{cases} \]
Symbol Meaning Dimension
\(A\), \(A_c\) Input/technology amount of the fuel (per powertrain, or per conversion \(c\)) depends on basis
\(\varphi_\text{pp}\) Combusted fraction for the powertrain (see conditions below) dimensionless
\(\varphi_c\) Combusted fraction for conversion \(c\) (its share, see conditions below) dimensionless
\(\operatorname{to\_mass}(\cdot)\) Conversion of the amount to a mass basis -

When PyGREET Places the Propagated Value

PyGREET places the biogenic CO₂ from propagation for an input only when all of the following hold. Otherwise the contribution is \(0\).

  1. The input is combusted. It has at least one conversion technology, or it is a vehicle (powertrain) fuel. Inputs that are not combusted produce no biogenic CO₂.
  2. No explicit biogenic CO₂ emission factor is defined for the combustion step. If the conversion technology (or the powertrain) already declares its own CO₂ biogenic emission, PyGREET uses your value instead, and propagation adds nothing on top of it (\(\varphi_c = 0\) for that conversion, \(\varphi_\text{pp} = 0\) for that powertrain). When no such factor is defined, the combusted fraction comes from the conversion share (\(\varphi_c\)) or from full powertrain combustion (\(\varphi_\text{pp} = 1\)).
  3. The fuel flow has a non-zero carbon ratio \(cr_f\). Without a carbon ratio, there is no stoichiometric path to CO₂.
  4. The biogenic carbon share is non-zero \(\big(w_\text{bioC} \neq 0\big)\). For a primary resource or internal product, the flow must be biogenic and have a biogenic carbon content. For a downstream input, upstream propagation must have delivered biogenic carbon to it.
  5. The combusted amount is non-zero and can be expressed in mass. If PyGREET cannot convert the amount to a mass basis, the contribution is \(0\).